Main page » Home » News

 






TC-Line CNC-Grips „Type I“

Handle grips from the new TC-Line (Top Custom Line) which is a synonym
for styling parts with uncompromising design and high-end quality.

Special characteristics of these grips are the CNC milled metal-ends as far as the metal handpiece with its rubber-windows, thus guarantees comfortable handling and a very ingenious look.

Thanks to the milled dots and the laser printed ODF-Logos, a high quality overall impression is given.







Grip-Series „Stripe“ with coloured rings.

This new grip series guarantees optimum grip as far as comfortable handling thanks to affixed stripes and soft rubber.

CNC milled metal decor rings with laser printed ODF logos let these grips look very sporty and upmarked.

 


 


















Mirror „Evo-Tech“ by ODF, CNC milled arm, tinted glass.

These „Evo-Tech“ mirrors by ODF are a synonym for innovative design and technical features.

Special characteristics of these mirrors are the CNC milled arm as well as the metal cap which have been screwed on the mirrors-head, thus creates a sporty
and technical look.

The technical design obtains perfection due to the dark tinted glass. Another advantage of this glass is the protection against too strong solar irradiations.

The delivery contents short thread-rods for an optimum position close to the handlebar.

Please note:
Peugeot-Models need to have a longer thread-rod. A longer thread-rod is
available as accessory for the Stage 6 mirrors which can be used.
Item-No. S6-SSP630ET001

 


 




TC-Line Numberplate-Holders for vertical Peugeot-Motors and CPI/Keeway/Generic/Sachs-Motors:

Numberplate-Holders from our TC-Line (Top Custom Line) which is a synonym for stylingparts of highest quality and uncompromising design.

Beyond the quality aspects this new generation of Numberplate-Holders is also very functionally, so this article comes to perfection:

- Adjustable frame from 45° to 90°.
- Improved position closer to the engine cover.
- Processing in stainless steel with higher breaking strength instead of aluminium.
- High grade varnish with strong shining colours. (Black, White, Red)
- Superior quality/gloss-properties of the chrome-version because of the previous polishing.

Finally these Numberplate-Holders have a good price-performance and because of all this facts they shouldn´t be missing on any scooter.

 


 


3 in 1 variator- and clutch tool for Minarelli-Motors and CPI/Keeway/Sachs/Generic–Motors

An exclusive 3 in 1 Tool to block and dismantle the variator and clutch bell, including built-in hexagon key to loosen the clutch nut.

The tool combines all the functions of the known and separate available Buzzetti tools (eg screw-Vario-stop tool) in an equally simple applicability. In addition, the stainless-steel tool stands out by a perfect fit and long life.

Finally, there is a possibility to do the complete set-up work (e.g. after buying an exhaust system) with only one tool and at a much lower price compared to single purchase!

An application description with pictures is included in the delivery.
 

 

 


 

 



Radiator Grill by ODF in different colours for CPI Hussar / Keeway RX8/RY8 – Art.-Group 14531

This Radiator Grill in a sporty air shaft design by ODF replaces the conventional plastic triangle and highly improves the look of the face area.

The grill is made from aluminum by precise CNC laser technology and painted in high-quality bright colours (black, white, red, blue).

Note: To mount the grill, the front cover has to be removed as the radiator grill is fixed on the back side. A detailed manual is including the delivery so that the installation can be performed easily even by inexperienced screwdrivers.

 

 


 

 

From now on we are able to offer our footplates for the following new models:

Art. 13540 Footplates Benelli 49X
Art. 13554 Footplates Sachs Speedjet R/RS
Art. 13548 Footplates Peugeot New Vivacity from model 2008
Art. 14597 Co-Driver´s Footplates Peugeot New Vivacity from model 2008

 

 


 

 

Motip brake caliper by ODF, 400ml spray, Art.-Group 16507-BL

Very high quality brake caliper paint from Motip in red, blue or yellow.
This coating enables to adjust the color brake calipers optimally.

The paint is heat resistant up to a temperature of 300 ° C and resistant to
oil and dirt.

Note: Before use clean the caliper with brake cleaner thoroughly!

 

 


 

 

Motip Metallic-Effect-Varnish, 400ml spray, Art.-Group 16507-ML

High quality spray paints by Motip with metallic effect in various colours. The paint is therefore perfectly in order to paint casing parts in a very noble, and trend-oriented look.

For best
painting results use plastic primer before applying and clear varnish finally.
Motip
offers suitable products that are highly recommended in combination.

 

 


 

 


 


Motip Heat-Resistant-Varnish up to 650°, 400ml spray, Art.-Group 16507-HB

This
heat-resistant coating up to 650° adheres particularly well on metal surfaces and because of this the varnish is perfectly suited for painting the engine block.

Exhaust systems
can also be
decorated and protected by rust with this paint. Only the upper part of the manifold is subject to higher temperatures, causing the paint could get damaged here after some time.

 

 


  

 

 


Motip Clear Varnish, 400ml spray – Artikel-Nr. 16507-KL

High-quality clear varnish spray from Motip. Clear coat must always be applied after painting so that the paint takes on a protective layer of sealant, which also generated the gloss effect.

 

 


 

 

 


Motip 2 in 1 Filler and Primer, 500ml, Item no. 16507-FÜL

This combined spray cans filler and primer from Motip is optimal to prepare the surface prior to painting  (e.g. to remove deep scratches). It can be also used in order to grind porous structure of plastic parts like interior or leg shields.

After drying of filler use a sand paper (grain size: 1000) in order to polish and to remove emery residuals, also by using a silicon remover.

 

 


 

 

 


Motip Plastic Primer, 400ml spray – Item no. 16507-KP

Motip plastic primer is essential in order to ensure an optimum paint adhesion to all plastic parts. This colorless primer should always be applied before painting.

Old paint should be removed completely before applying with sandpaper and the surface has to be cleaned with nitro thinner before applying too.

 

 


 

 



Racing Grill 30x30cm, fine structure – Art.-Group 16504-30

Fine structured racing grill by ODF in various colours. Ideal for masking and decorating of radiator grills and air intakes. Creates an absolute racing look!

The grid can be very easily processed, or be cut with scissors.

 

 


 

 


Fuel-Pipes, 1 meter, 5mm diameter – Art.-Group 16516

Fuel pipes in 6 different colors, each with 5mm diameter and 1 meter in length.

Ideal for decoration of the engine bay.

 

 


 

 




 

Battery cover from the new TC Line for Yamaha Aerox / MBK Nitro - Article Group 14510-TC

Battery cover from the TC Line (Top Custom Line) of ODF, which stands for styling parts at the highest possible quality with uncompromising design.

The cover is made of stainless steel and coated with high quality and strong shining paint in black, white, red or blue colour.

The sporty air shaft design as well as the noble ODF TC-line branding make this cover to a brilliant eye-catcher.

The delivery includes a transparent foil and tapes to mask and protect the air shafts against water entry. The look is more ingenious when lights are installed behind the air shafts.

White or black rally stripes for decoration are also included in the packaging and may possibly be used – on the picture they are shown for demonstration.

 


 


 


 numberplate holders, adjustable

Numberplate-Holders from our new TC-Line (Top Custom Line)
which is
a synonym for stylingparts of highest quality and uncompromising design.

Beyond the quality aspects this new generation of Numberplate-
Holders is also very functionally, so this article comes to
perfection:

• Adjustable frame from 45° to 90°.
• Improved position closer to the engine cover.
• Processing in stainless steel with higher breaking
  strength instead of aluminium.
• High grade varnish with strong shining colours.
 
(Black, White, Red)
• Superior quality/gloss-properties of the chrome-version
  because of the previous polishing.

Finally these Numberplate-Holders have a good price-performance
and because of all this facts they shouldn´t be missing on any
scooter.

Advice: Please use Loctite screwlock for mounting.

 

 


 

 

 

 Lighting-Unit for numberplate holders.

Lighting unit for all numberplate holders from the TC-Line by ODF which can be simply screwed on the numberplate holders.

Available in 4 different colour shapes including lamp with chromed casing.

 

Welcome to Opticparts DF – your specialist for scooter stylingparts!

Opticparts DF represents high quality scooter stylingparts made in Germany. Our product line of manufactured articles is completed by the import of further articles, thus enabling us to offer a large assortment of stylingparts from one hand.

We are pleased to present you herby our latest product newsletter.

Taking interest in our company and our products? Just send us an e-Mail with your inquiry and our sales team will respont concerning special prices, delivery terms and product samples immediately. 

 

 


 

 

 Footplates made of high-grade steel for 
                     all current types of scooters:

Footplates by ODF from the new TC Line (Top Custom Line) which stands for custom parts of highest possible quality in connection with uncompromising designs.

The TC Line footplates are made of brushed high-grade steel and are cut by CNC laser technology. As living from Opticparts, all necessary models are bent by special tools precisely which guarantees an optimum accuracy of fit.

The sporty air shaft design, as well as the noble ODF and TC-Line brandings make these high-quality footplates a superlative custom part.

As a special highlight, suitable ultra grip elements can be simply inserted and screwed inside the air shafts. The black varnished grip elements protrude 3mm beyond the footplates with the result of a very brilliant 3D effect.

On the other hand a rather better grip on the footplates will be obtained even when it is raining and the designs beetween the grip elements will be protected much better against srcatches.

The delivery of the grip elements follows in a set with 4 parts for both footplate sides.

 

Brake levers O]DF / TC-Line in two designs for Yamaha Aerox / MBK Nitro

The first product of O]DF from the new TC-Line (Top Custom Line) which stands for custom parts of highest possible quality in connection with uncompromising designs.

The brake levers are made exactly out of full material by CNC technology, as well as are polished before chromium-plating for a highest possible brilliant degree.

Optional in the square "ultra sport" design available, as well as in the "angry eyes" design for everybody which like it a little more aggressively.

Available in each case in chromium-plated, black
mat anodized, or white brilliantly varnished. 
Chrome grips with coloured Tribal.

Handlebar grips of chromium-plated aluminium with milled Tribal lend a noble customlook to your scooter.

Thanks to the high-quality soft rubber these clutches lie nicely solidly and pleasantly at the same time in the hand.

Available in the colours black, white, red and blue.
Indicator "smart curve" universal with CE certification mark

Thanks to very soft contours this “smart curve” indicators by O]DF are convicing with a very noble and discreet design. The clear glasses with the chromium-plated bulb fittings in the Lexus style complete the successful optic.

Thanks to the equipment with a CE certification mark these indicators may be used absolutely legally.

Available in chrome, black and carbon.

Tip: The indicators are equipped with a M8 thread which makes it possible to mount the indicators directly on the universal undertray numperplate holder which has extra holes for this case.
  LED rear light with CE certifictaion mark for Peugeot Speedfight 3

This latest generation of LED rear light in Lexus – clear glass style means an optical highlight which is a must for any scooter!

Thanks to CE certification mark this rear light may be used absolutely legally and is therefore ideal as an inexpensive replacement for the original.
  Headlight unit for Yamaha Aerox / MBK Nitro with indicators.

Headlight unit in the aggressive design, which guarantees an absoluetly remarkable face lift.

As a special highlight this headlight is equipped with two LED strips, which can be used as indicators, or very stylish position light.

Tip: Connect the LED strips simply to the high beam headlights in case that you like to use this as separate position light which is able to be turned on and off any time you like.
  Headlight unit for Peugeot Speedfight 2

Headlight unit in the sporty design which guarantees an absoluetly remarkable face lift.

4 x 12 Volt halogen spotlights ensuring a strong lighting.

Thanks to the high quality execution the assembly is possible without any problem.
  Pillion passenger seat covers for further models

Pillion passenger seat covers by O]DF
enabling to decorate the seating surfaces in conformity with the colour of the scooter which means perfectly harmonizing the total picture in terms of colours.

As a special quality feature these seat covers are made of a high quality weather resistant synthetic leather with an excellent fit size accuracy.

Available for the following models:

Aprilia SR/Di-Tech up to model 07-2005
Aprilia SR R/Factory from model 07-2005
Peugeot Jetforce  
  Seat covers for further models

High quality seat covers made in Europe by Opticparts! As a special quality feature these seat covers are doubble stitched from a high quality weather resistant synthetic leather. On top of that the seat covers have an excellent fit size accuracy. The very sporty two part design will certainly leave no one’s desire to design the seat even more attractively!

Thanks to various colours the opportunity is given to decorate the seat in conformity with the colour of the scooter which means perfectly harmonizing the total picture in terms of colours. Finally the embroidered Opticparts Logo completes the precious optical appearance.

Available for the following models:

Aprilia SR / Di-Tech 1997-2005
Aprilia SR R / Factory
Gilera Runner bis Bj. 08/2005
Gilera Runner ab Bj. 08/2005
CPI Hussar / Keeway RX8/RY8
Peugeot Speedfight 1+2
Peugeot Speedfight 3
Peugeot Jetforce
Piaggio NRG Power
Piaggio TPH, NTT
Piaggio NRG, mc², mc³
Yamaha Aerox / MBK Nitro
Yamaha Jog / MBK Mach G
Yamaha Neo´s / MBK Ovetto
NEW!
Yamaha Slider / MBK Stunt NEW!

 


Back
 


 
Parse Time: 0.096s